1. Turn on the dust removal system first;
2. Mount the workpiece to be cleaned on the hook outside;
3. Drive the hook into the cleaning room and stop the operation;
4. The door of the cleaning room is closed and the hook starts to rotate;
5. Then turn on the lifter of the shot blasting machine;
6. Start the shot blasting machine;
7. The gate of the pill supply system opens and the cleaning starts;
8. After the cleaning is completed, the shot blasting machine stops and the gate of the shot supply system is closed;
9. The hook rotation stops;
10. The hoist stops (if it continues to clean, it may not stop);
11. The door is opened and the hook is opened to unload the parts outside;
12. The dust removal system stops (if cleaning continues, it can be kept).
13. Turn off all power supplies.
14. Clean up the sanitation around the machine and check the wear and tear of each part of the machine, and make simple records